Aerator Sewage Treatment Fish Pond Aeration High-Pressure Pneumatic Conveying Roots Blower

• Customization: Available
• Material: Iron
• Usage: for Experiment, for Air Conditioner, for Manufacture, for Refrigerate, Cast Iron
• Model NO.: YCSR80
• Pressure: High Pressure
• Certification: ISO, CE, CCC
• Transport Package: Wooden Cases
• Specification: 1150*720*664mm
• Trademark: YINCHI
• Origin: China
• HS Code: 8414599010
• Production Capacity: 5000 Sets/Day

Product Description

Product  Description

What is  the Roots blower?

The Roots blower is a positive displacement blower that separates the inlet and outlet through the "meshing" of a pair of rotors (there is a gap between the rotors, but not in contact with each other). The rotor is driven by a pair of synchronous gears and moves in the opposite direction to push the inhaled gas from the suction port to the exhaust port without internal compression.

Intake: When the Roots blower starts to operate, the two vane rotors rotate relative to each other in the cylinder. When the blades of the rotor are separated from the cylinder wall, an expanded volume is formed, allowing gas to enter the blower through the air intake.

Compression: As the rotor continues to rotate, the volume gradually decreases, so that the gas is compressed between the rotor blade and the cylinder wall. As the volume decreases, the gas is compressed and the pressure increases.

Exhaust: When the compression is complete, the compressed gas is discharged through the exhaust port. At this point, the blades of the two rotors are separated again, forming an expanded volume to prepare for the next round of intake.

Product information

Model	YCSR	Original place	China Shandong
Air Capacity	3m3/min~6.12m3/min	Company Feature	Direct factory manufacturer
Air Pressure	9.8kpa~78kpa	HS Code	8414599010
Connect type	V-belt	Application	wastewater treatment /Aquaculture/ Pneumatic conveying
MOQ	1 set	Altitude	≤1000m

Accessories

The basic structure of Roots blower

Roots fan is mainly composed of casing, impeller, drive shaft, gear, bearing and so on.

An impeller is usually composed of two or more intermeshing impellers, one of which is called the main impeller and the other is called the slave impeller. The gear shape and size of the main and secondary impeller are the same, and rotation is achieved by engaging the gear.

Roots blowers usually use two types of bearings: main bearings and slave bearings. It is mainly used to support and position the drive shaft of Roots blowers to reduce friction and vibration and to ensure smooth rotation of the shaft.

 

 

 

Impeller	The impeller is an important part of the blower, which is precisely processed by a special machine tool to ensure small vibration and stable operation of the blower.
Bearing	The bearing adopts large-sized heavy bearing. The double end oil lubricated bearing adopts splash lubrication mode, and the oil splashes onto the bearing for lubrication through the rotation of gear or oil slinger; The drive end bearing of single oil tank fan is grease lubricated, and the gear end bearing is oil lubricated, using splash lubrication.
Elastic joint	The elastic joint installed on the unit can eliminate the influence of external vibration transmission and thermal deformation of the unit, and facilitate the installation of pipes.
Safety valve	It can protect the blower for a short time of overload
Check valve	High pressure gas return protection can be provided for the blower, but the gas return cannot be completely blocked
Pressure gauge	The exhaust pressure of the unit can be displayed at any time, and the vacuum gauge can display the inlet vacuum of the unit at any time
Synchronous gear	The synchronous gear is the most important part of the fan, which is made of chrome manganese titanium alloy steel with sufficient strength; The gear is finely ground with a special gear grinder, and the gear is lubricated with oil bath.Precise straight synchronous gear is adopted, with reliable positioning, stable operation, low noise, high strength and long service life
Inlet silencer	The inlet silencer has an orifice filter structure, which can effectively prevent foreign matters from entering the body of the blower and ensure the safe operation of the blower.

 

Features of Roots Blower

1. Adopting an air-cooled structure, the single-stage pressure belt transmission is 78.4 KPa, the direct transmission is 78.4 KPa, and the vacuum degree is -49 KPa without cooling water.

2. The impeller adopts an advanced structure with a three blade blade shape, high area utilization coefficient, and good rigidity, ensuring high pressure, large flow rate, and smooth operation of the fan.

3. Adopting precision spur synchronous gears, keyless connection, reliable positioning, smooth operation, low noise, high strength, and long service life

Application


Packaging & Shipping

Company Profile

Shandong Yinchi Environmental Protection Equipment Co., Ltd. is a medium-sized environmental protection machinery and equipment company located in Jinan, the capital city of Shandong Province. With developed heavy industry and convenient transportation, it is adjacent to the Yaoqiang International Airport, which is only a 2-hour drive from a port city like Qingdao. The company was founded in 2018 and established an international trade department in 2022, introducing technical talents and equipment, expanding production lines, expanding factories and warehouses, Establish a logistics service team and an international after-sales service team to truly achieve a modern chemical factory that integrates research and development, production, testing, warehousing, and sales. The factory covers an area of 3000 square meters, with a sales team of 53 people, three technical teams, two international after-sales teams, five production lines, and total assets of nearly 100 million yuan. The annual production equipment can reach 100000 sets.

 Certification


FAQ

1. How can I get the price?
- We usually quote within 12 hours after we get your inquiry .You can contact me on "Made in China"

2. Can I buy samples? - Yes. Please feel free to contact us.
-Our MOQ: 1 SETS

3. What is your delivery time?
- It depends on the order quantity,as general with 15 days.

4. What is your payment term?
- T/T, CASH.L/C,Western Union, MoneyGram, and Paypal. This is negotiable.

5. What is the shipping method?
- It could be shipped by sea, by air,  Please confirm with us before placing orders.

6. How do you make our business long-term and good relationship?
- Best Quality + Fast Delivery time + Competitive price + Professional service