Material: | Iron |
---|---|
Pressure: | High Pressure |
Certification: | ISO, CE, CCC |
Connect Type: | Coupling or V-Belt |
Transport Package: | Wooden Cases |
Specification: | 1280*820*910 |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
Model | YCSR | Air Pressure | 9.8kpa--58.8kpa |
Connect type | Coupling or V-Belt | MOQ | 1 set |
Power Source | Electrical motor Or Diesel Engine | Cooperation model | OEM/ODM, we also have our own brand |
Application | fish shrimp pond aeration | Working Temperature | below 50ºC |
Air Capacity | 3.25m3/min-9.62m3/min | Attitude | below 1000m |
Roots blower action:
Roots blower is a kind of blower equipment commonly used in the industrial field, its working principle is by rotating two internal and externalrotors that mesh with each other, the air or gas is inhaled from the air inlet and discharged to the air outlet, so as to achieve oxygen supply,sewage, ventilation and other functions. The Roots fan pumps air into the solution to roll, so as to achieve the effect of stirring the solution andreduce the time of chemical reaction.
The largest consumption in the sewage treatment aeration industry and pneumatic conveying industry ismainly because of the large pressure and large air volume generated by the Roots fan when it is working. In addition, Roots blower can also beused
as mud mixing , fertilizer fermentation , high pressure air knife , vacuum suction , electroplating aeration and so on. This kind of blower is simple in structure and convenient in manufacture. It is widely used in aquaculture oxygenation, sewage treatment aeration, cement conveying, and is more suitable forgas conveying and pressurizing system in low pressure occasions. It can also be used as vacuum pump.
Impeller |
The impeller is an important part of the blower, which is precisely processed by a special
machine tool to ensure small vibration and stable operation of the blower.
|
Bearing |
The bearing adopts large-sized heavy bearing. The double end oil lubricated bearing
adopts splash lubrication mode, and the oil splashes onto the bearing for lubrication
through the rotation of gear or oil slinger; The drive end bearing of single oil tank fan is
grease lubricated, and the gear end bearing is oil lubricated, using splash lubrication.
|
Elastic joint |
The elastic joint installed on the unit can eliminate the influence of external vibration
transmission and thermal deformation of the unit, and facilitate the installation of pipes.
|
Safety valve | It can protect the blower for a short time of overload |
Check valve |
High pressure gas return protection can be provided for the blower, but the gas return
cannot be completely blocked
|
Pressure gauge |
The exhaust pressure of the unit can be displayed at any time, and the vacuum gauge
can display the inlet vacuum of the unit at any time
|
Synchronous gear |
The synchronous gear is the most important part of the fan, which is made of chrome
manganese titanium alloy steel with sufficient strength; The gear is finely ground with a
special gear grinder, and the gear is lubricated with oil bath.Precise straight synchronous
gear is adopted, with reliable positioning, stable operation, low noise, high strength and
long service life
|
Inlet silencer |
The inlet silencer has an orifice filter structure, which can effectively prevent foreign
matters from entering the body of the blower and ensure the safe operation of the blow
|
Factory
Certification
FAQ
Suppliers with verified business licenses